Monday, December 1, 2014

DIY: Carpeting Spiral Stairs

 photo IMG_6939.jpg

Remember a while back when I bought this rug to use as a runner on our black stairs? I never quite got around to doing the project, so all the little Jaipur runners I got from RugsUSA have been just sitting in a closet, waiting to be used.

 photo IMG_6879.jpg

Part of the problem was I have been on the fence for months about whether or not I wanted to use a pattern (even a relatively subtle, neutral one) on my main stairs. I'm thinking of maybe doing a simple sisal in there instead. The spiral stairs in the mudroom needed carpeting too though, so it seemed like a good idea to use the runners in there instead, while I figured something else out for the entry stairs. Here's a reminder of how the stairs up to my studio looked when we moved in:



 photo dDSC_0632.jpg

 photo DSC_0627.jpg

 photo dDSC_0626.jpg

Since moving in, we've painted the tile floors a dark gray and paneled the walls and painted them navy. We also pulled off the carpeting on the stairs and painted the rails and treads bright white.

 photo IMG_7108.jpg

We had painted the treads the same color as the rail, but they were noisy and less safe-feeling without the carpeting. I was really excited to finally get these covered last week!

 photo IMG_6884.jpg

I picked up a quart of flooring glue at the hardware store and spread an even coat on the top of the tread before flipping it over on to the carpet runner.

 photo IMG_6888.jpg

It was important to be consistent with my pattern placement, so I lined up the tread in the same place every time before cutting.

 photo IMG_6902.jpg

I used a pair of super heavy-duty shears from Home Depot in the tool section to cut the runners. It made a world of difference to have the extra long, extra sharp blades.

 photo IMG_6906.jpg

I cut the runner to be just wide enough to cover the sides of the treads. I also cut out the corners, so when I folded up the edges, there would be no extra material in the corners.

 photo IMG_6909.jpg

After adding more glue to the edges, I stapled the sides in place and then trimmed away any extra rug material.

 photo IMG_6924.jpg

After letting the glue dry a bit, I popped the treads back into the stairs. I LOVE how they look and feel now!

 photo IMG_6950.jpg

The rug pattern was double sided, but I went with the darker side up and hopefully that will help to hide traffic stains. I'm also thinking about Scotchgarding the treads this week as a precautionary measure.

 photo IMG_7078.jpg

 photo IMG_6948.jpg

I love how the subtle pattern looks with the wall and floor colors. I hung a few new pieces of art and added a bougainvillea tree that I planted in a brass trash bin. :)

 photo IMG_7890.jpg

 photo IMG_7908.jpg

I also upholstered a little thrifted bench to tuck under the stairs. I love all the textures together!

 photo IMG_6940.jpg

 photo IMG_6985.jpg

It took several hours to upholster the treads (most of the time was spent cutting), but I'm so happy with how this project turned out. It makes me want to figure out a runner for our front entry stairs right away!

 photo IMG_7044.jpg

PS I popped over to RugsUSA today to try and find the link to the Jaipur runners and saw they're having a great 75% off sale for Cyber Monday. I'm looking for a small-ish rug for our nursery (!) and I think there are some really cute contenders here. They've added a ton of great rug lines since the last time I shopped their site. It also looks like they've figured out how to take better photos of their rugs too - now you can zoom in tight and see the weave and get a way better sense of the colors. Good stuff.

 photo Rugs1.jpg
1  //  2  //  3  //  4
 photo Rugs2.jpg
5  //  6  //  7  //  8

No comments:

Post a Comment